7
Punch Document Pages & Covers:
1.
Set Edge Guide to Document
Length. Common document sizes
for 11”/A4/8.5 are marked
on the coil machine.
2.
The goal in punching your Coil
document is to center the holes
along the binding edge. There
are 47 disengageable die set pins
to avoid partially perforated holes
in the most common sheet sizes.
3.
Our pull pin label on top of the
Coil Binding System 3000 is
designed to guide you as to what
pins to pull for your common
document sizes.
•
We suggest taking a plain sheet
of paper and testing the hole punch
to ensure it is centered and
that the appropriate die set
pins are pulled or disengaged.
•
Once a test punch is complete
you are ready to punch your document
.
4.
Insert paper, slide left,
press Punch button or Foot pedal.
The Red LED will light up when punching
with the Foot pedal.
•
Recommend punching no more than
20 sheets of 20lb. (75gsm) bond at
one time.
•
Recommend punching no more than
2 sheets of Plastic/Vinyl/Heavier
Paper covers at one time.
Common Document Length
# Punched Holes
A3 (16.5" or 419mm) =
66 holes
(2 punch passes)
Legal (14" or 356mm) =
56 holes
(2 punch passes)
A4 (11.69" or 297mm) =
47 holes
A3 Landscape (11.69" or 297mm) =
47 holes
Letter (11" or 279mm) =
44 holes
1/ 2 Letter (8.5" or 215.9mm) =
34 holes
A5 (8.27" or 210mm) =
33 holes
Max Punch Length (23.4" or 594mm)
Punch Pattern:
Coil 4:1
Pitch,
Oversized Oval Hole (4 x
5mm),
.2475” center-to-center hole
spacing
Summary of Contents for 3000
Page 7: ...6 ...
