background image

Issue “0” Part # 941005                                                                                                       www.RHIN-O-TUFF.com 

2) Overview of the HD-e4100 Econ-O-Roll; 
See Fig. A. The HD-e4100 has many useful features to increase your coil binding 
productivity: 

1-  Adjustable Lower Roller: The Adjustable Lower Roller supports the lower side of 

the coil while binding. It has 3 positions. Top position is for 5MM to 13MM coil, 
middle position is for 14MM to 22MM, and the bottom position is for 23MM to 50MM 
coil. 

2-  Doc-U-Form Book Former: allows you to form your book to allow for   quick starting 

and binding of large books. 

3- Upper 

Roller: The soft Upper Roller grabs the coil and spins it into the book quickly 

and effectively. 

4-  Left Handed Coiling Position: By moving the Adjustable Lower Roller into this 

position and coiling from the back of the HD-e4100 provides for Left handed coiling. 
Left Handed Coiling is a NEW Feature! 

5-  Rear Doc-U-Form book Former: Used with Left Handed Coiling. 
6- Power 

Switch: 

This switch turns the HD-e4100 on and off. Pushing on the I symbol 

side of the switch turns the machine ON, the O turns the machine OFF.  

7- Power 

Cord: In case of any emergency use the power cord as the main power 

Cutoff!!! 

8- Fuse 

Holder: 

Always replace fuses with the correct amperage and type (PDI P/N 

001763 115VAC or 001664 230VAC); 

9

  115VAC use; 1ea. FUSE,1 AMP 1/4 X 1 1/4 MDL-1-R    

9

  230VAC use; 2ea. FUSE,1 AMP M5 X 20  GMA-1-R 

 

 

Fig. A 

Summary of Contents for Econ-O-Roll HD-e4100











Reviews: