RHINO METALS Longhorn LSB1014, Owner'S Manual

Adjustable Shelving

Shelves are adjustable by placing the included clips at the desired level.

Anchor Holes

Predrilled into the bottom floor, allowing safe to be securely bolted to ground.

Dead Locking Bolts

Door bolts that do not move when safe handles are rotated.

Door Adjustment Tabs

Adjustable tabs used to tighten the safe door that may be loose.  Simply bend out 
using a screwdriver to put tension on the locking bolts, pulling the safe door into 
the frame.  Do not pull door adjustment tabs out too far as this can damage the 
locking bolts and make the safe difficult to open. The LSB1014 does not come with 
adjustment tabs.

Heat Expandable Fire Seal

Factory installed around inside of frame of safe body to provide additional fire 
protection.  Seal will expand up to seven times its flat size when exposed to high 
temperatures, sealing door gaps from smoke and heat.  Seal does not require any 
maintenance, nor should it be removed.

Labels

Contains pertinent information regarding patents, fire protection, and security 
classification of the safe.

Locking Bolts

Door bolts that retract and extend when rotating the safe handle to  unlock and 
lock the safe, respectively.

Model and Serial No. Label

Model and serial number, attached at bottom of the door.

Safe Interior:  Glossary of Terms

Maximum load for each shelf is 40 lbs.  Always be sure shelves are level 
before loading.

Rhino Metals Technical Support (208) 454

-

5545

11