RHINO METALS Longhorn LSB1014, Owner'S Manual

Unboxing Safe

Your new safe left the factory in new condition and without damage.  Upon delivery, 
inspect the safe as soon as you receive it for any shipping damage.  Please report any 
damage to the delivery company (or carrier).  Manufacturer is not liable for any 
damage that is not reported after the delivery receipt is signed. 

If you purchased your safe from a retailer and made arrangements to have the unit 
delivered and installed, the delivery company personnel can advise you on safe 
placement within your home.

If you are doing your own delivery and installation, you need to read and following 
the instructions within this manual.  There are risks associated with doing your own 
installation.  We recommend using a professional moving company to move your 
safe.  The safe can be heavy so always use caution when moving to prevent damage 
to flooring, doorways and walls, and personnel.

1.

Remove and discard all outer packaging, including the cardboard box, plastic 
protective cover and corner foam pieces located inside the safe door. Do not use 
a box cutter or you may damage the item.

2.

The  safe  is  shipped  with  the  door  closed  and  the  lock  in  an  unlocked  stable 
position.  Open the safe by following the 

LOCK  OPERATING

INSTRUCTIONS

on 

pages 12

-

14, depending on lock style.

3.

If your safe has a key (LSB1014), the key is located on top of the safe.

       SAFE DOORS ARE HEAVY.  DO NOT OPEN THE DOOR

          WHILE SAFE IS UNSTABLE AND NOT ON A LEVEL SETTING.

SAFETY PRECAUTIONS

 

Do not attempt to move safe with the safe door open or unlocked.

 

It is highly recommended that you do not remove the safe door from the safe.

 

Failure to follow these precautions can result in serious injury or death.

DELIVERY AND INSTALLATION

Rhino Metals Technical Support (208) 454

-

5545

7