RHINO METALS Longhorn LSB1014, Owner'S Manual

Model and Serial No. Label

Contains the model and serial number, attached to the side of safe.

Safe Body

Outside of the safe.

Safe Door

Allows entry into the safe, pre

-

installed with safe lock and safe handle.

Safe Handle

Allows the safe door to be opened after the correct combination is entered into 
the safe lock.  Depending on the model, handle may be a hand wheel or a 
formed tab.

Safe Lock

Mechanism with a combination that allows the safe to be securely locked.  The 
LSB2418 and LSB1818 safe locks are electronic locks.  

Locks available:

 

SecuRam

™ 

electronic lock, see pages 12 and 13.

External Hinges

Movable mechanism allowing the safe door to swing open and closed.  External 
hinges allow 180° opening for greater access to contents inside the safe and 
helps provide the best fire and theft protection possible.

The Clutch

Factory installed on all safes (except the LSB1014) and automatically 
disengages the shaft of the safe handle from the locking mechanism if the safe 
handle is rotated in either direction without first unlocking the lock.  This helps 
prevent damage to the lock without requiring a failure somewhere else in the 
mechanism that would cause a lockout.

Safe Exterior:  Glossary of Terms

Extended Lock Warranty for any lock can be purchased within 30 days 
from the date the safe is purchased—see page 21 for details.

Call for assistance if the clutch is not functioning properly.  Do not attempt 
to adjust the clutch yourself.

Rhino Metals Technical Support (208) 454

-

5545

9