7
OPENING THE LOCK
Enter the existing six digit code. The lock comes from the factory set to
1-2-3-4-5-6 and/or 1-1-1-1-1-1. Each key press is confirmed with an audio and light signal.
The lock will indicate a valid code entry with a double signal.
Ensure that the factory default settings are overwritten. Failure to change the factory
default combinations may result in unauthorized access.
Within 3 or 4 seconds, turn handle clockwise; pull door open.
To lock the safe, turn the safe handle counter-clockwise. Always check to
ensure the lock has engaged by turning the handle clockwise.
WRONG TRY PENALTY
Entry of 4 consecutive invalid codes starts a 5 minute delay period. (LED will flash at 5 or 10
second intervals.) This lock will indicate an invalid code entry with a triple signal.
At the end of the lock-out period, two more incorrect codes will restart an additional 5-
minute delay period.
LOW BATTERY INDICATIONS
Repeated beeping during opening indicates that the battery is low and needs immediate
replacement.
Uses (1) 9-Volt battery. We recommend the use of Duracell™ or Energizer™
batteries. Battery must have “use date” at least 4 years in the future.
The lock manufacturers recommend replacement of the battery at least annually.
LaGard Lock
SecuRam Lock
Electric Lock Operation
