Page 5 of 5
Rhino-Rack 4 Bike Carrier RBC044
Note
Top View: For
additional Bikes (4
max), face Bike in
alternate
directions. This
will ensure the
Bikes will not
clash together
during travel.
Ensure there is
no obstruction
of view to lamps
and registration
plates, adjust
fork positions to
achieve this if
required.
14
To access the rear of the vehicle, remove the Security Pin. Lift up the Lever as shown. The Rack will tilt forward.
This is
only to be done when bikes are not on the Rack.
Note:
Check the Bikes do not cover/ block the
Tail Lights and Licence Plate. An RBCA011
(License Plate Holder) may be required to
meet road and safety regulations in your
state.
1
= 1x 15kg
(33lbs) MAX
2
= 1x 15kg
(33lbs) MAX
3
= 1x 15kg
(33lbs) MAX
4
= 1x 15kg
(33lbs) MAX
