background image

13500lb - 175000lb - 20000lb

© 

Rhino Winch Co

8

© 

Rhino Winch Co

WARNING

FALLING OR CRUSHING HAZARD

• 

Always

 stand clear, keep hands clear and keep 

others away when using the winch. 

• 

Never

 operate the winch with less than five turns of 

wire cable / ten turns of synthetic rope around the 
drum. The cable / rope could come loose because 
the rope attachment to the drum is not designed to 
hold a load. 

• 

Never

 use the winch as a hoist or to suspend a load. 

• 

Never

 use winch to lift or move people. 

• 

Never

 use excessive force to free spool the winch 

rope. 

• 

Always

 use proper posture / lifting technique or get 

lifting assistance while handling and installing the 
product. 

• 

Always 

spool the rope so that it feeds out of the 

bottom (mount side) of the drum as per the drum 
rotation labels on the winch. This is required for the 
automatic brake to function properly.

WARNING

CHEMICAL AND FIRE HAZARD

• 

Always

 remove jewelry and wear eye protection. 

• 

Never

 route electrical cables across sharp edges.

• 

Never

 route electrical cables near parts that get hot. 

• 

Never

 route electrical cables through or near moving 

parts. 

• 

Always

 place the supplied terminal boots on the 

wires and terminals. 

• 

Never

 lean over the battery while making 

connections. 

• 

Never

 route electrical cables over the battery 

terminals. 

• 

Never

 short the battery terminals with metal objects. 

• 

Always

 consult the operator’s manual for the correct 

wiring diagrams.

• 

Always

 insulate and protect all exposed wiring and 

electrical terminals.

Summary of Contents for 13500lb


















Reviews: