LaGard Lock
SecuRam Lock
9
LaGard and SecuRam Electronic Lock Instructions
Installing or Replacing The Battery
-To remove the keypad, push
straight up from the bottom of the
keypad until it releases.
-Carefully pull the keypad away
from the safe to prevent damage to
the wiring harness.
-With the battery cavity accessible,
remove the old battery and discard
(if replacing).
-Plug a new 9-volt battery into the
terminals and tuck the battery and
wires back into the battery cavity.
-Slide the keypad back down onto
the shoulder screws. Be careful
not to pinch the wiring on the
screws.
We recommend using a Duracell
™
or Energizer
™
alkaline battery with a
“
use
date
”
at least 4 years in the future. Replacing the battery annually will help to
ensure reliable access into your safe.
Low Battery Indication
Repeated beeping during opening indicates that the battery is low and needs
immediate replacement.
