Still Settings
1.
To access the still settings, press the menu button on the top right side of the camera once, while in camera
mode.
2.
Use the zoom in/out buttons on the right side of the camera to scroll up/down through the menu, and the
“OK” button to confirm.
a.
Capture Mode:
Set the timer delay when taking a photo with the camera.
b.
Resolution:
Change the resolution of the photos taken. 12M 4032x3024, 10M 3648x2736, 8M
3264x2448, 5M 2592x1944, 3M 2048x1536, 2MHD 1920x1080, VGA 640x480 and 1.3M 1280x960
are available.
c.
Sequence:
Enable/disable sequenced photos. If enabled, three sequential photos will be taken
when taking a picture.
d.
Quality:
Change the quality of photos taken. Higher quality photos have larger file sizes.
e.
Sharpness:
Change how crisp/soft photos are.
f.
White Balance:
Manually change the white balance of photos taken, or set it to automatic.
g.
Color:
Change the color of photos taken. Color, black & white and sepia tone are available.
h.
ISO:
Change the sensitivity of the image sensor. Auto is recommended.
i.
Exposure:
Change the light exposure of photos taken.
j.
Anti-Shaking:
Enable/disable anti-shaking. When enabled, the camera accommodates for shaking
hands while taking the photo.
k.
Quick Review:
Change how long a picture preview appears on the screen for after taking a photo.
l.
Date Stamp:
Enable/disable date stamps. When enabled, the date that photos were taken will be
overlayed onto the photo.
Playback Settings
1.
To access the playback settings, press the menu button on the top right side of the camera once, while in
playback mode.
2.
Use the zoom in/out buttons on the right side of the camera to scroll up/down through the menu, and the
“OK” button to confirm.
a.
Delete:
Delete either the currently selected footage/photo, or everything on the SD card.
b.
Protect:
Lock/Unlock either the currently selected footage/photo or all of them. Locked
footage/photos cannot be deleted.
c.
Slide Show:
Start a slide show of images, setting how long it stays on an image. Press the “Mode”
button to end the slide show.
Setup Settings
1.
To access the setup settings, press the menu button on the top right side of the camera
twice
, while in any
mode.
2.
Use the zoom in/out buttons on the right side of the camera to scroll up/down through the menu, and the
“OK” button to confirm.
a.
Date/Time:
Set the date/time.
b.
Car NO:
Set the car license plate number.
c.
Auto Power OFF:
Set how many minutes of inactivity it takes for the camera to power off.
d.
Parking Monitor:
Enable/disable the parking monitor.
e.
Beep Sound:
Change the volume of the camera’s beeping.
f.
Language:
Change the menu language.
g.
TV Mode:
Change the TV mode between NTSC/PAL.
h.
Frequency:
Change the frequency between 50hz and 60hz.
i.
Lamp Setting:
Turn the front lamp on/off.
j.
Backlight:
Set how many minutes of inactivity it takes for the monitor’s backlight to turn off.
k.
Format:
Format the inserted SD card, deleting all data from it.
l.
Default Setting:
Restore all settings to the defaults.
m.
Version:
Check the camera’s version.
