22
1. INTRODUCTION
This manual is intended to be a general guide to the installation, the use and the maintenance of the "
CEHV
"
series of evaporative cooling towers for industrial water cooling applications.
Prior to performing whatever intervention or activity for the unit, the instructions contained in this manual should
be carefully read; any disregard of the same may give rise to problems for which MITA will not accept any
responsibility.
1.1 Use envisaged
The cooling towers herein described and illustrated are suitable for the cooling of industrial-type water,
nonetheless chemically and physically clean.
1.2 Limitations to the usage
All types of usage and application different from those envisaged are prohibited and in any case recommended
against, particularly those with pollutants and/or compounds poisonous, if released to the atmosphere, in solution
in the water.
1.3 Identification of the unit
All cooling towers are equipped with an identification plate, applied on the outside panel , close to the water
make-up connection.
This name-plate carries the technical operating data of the unit, in addition to the year of manufacture and the
identifying serial number [Fig. 01].
When requesting replacement parts of after-sales technical assistance, the serial number must be provided to
Service.
MANUFACTURED BY MITA – VIA ANTONIO M. FONTANA 1
27100 SIZIANO (PV) – ITALY
ANNO DI FABBRICAZIONE
FABBRICATION YEAR
TORRE MODELLO
TOWER MODEL
MATRICOLA
SERIAL NUMBER
MASSA A VUOTO (KG)
EMPTY WEIGHT (KG)
PORTATA ACQUA (m3/h)
WATER FLOW (m3/h)
PREVALENZA (m H2O)
PRESSURE LOSS (m H2O)
POTENZA
INSTALLATA (KW)
INSTALLED
POWER (KW)
TENSIONE (Volt)
VOLTAGE (Volt)
[Fig. 01]
1.4 Documentation supplied with, attached to, the Unit
Every cooling tower is provided with a “DECLARATION OF INCORPORATION” (to Directive 98/37/EC, article 4,
paragraph 2, appendix II.B) and is conform to the rules of the following European directives:
- electromagnetic compatibility (EMC) 89/336/EEC and subsequent modifications
- low voltage 73/23/EEC and subsequent modifications.