Rhyas EFM4001, Manual

EN

7

machine, this will only delay the sanding.

•  Regularly check the condition of the sanding 

belt. Replace when necessary.

•  Always sand with the grain of the wood.

4. service and maintenance

 Make sure that the machine is not live 

when carrying out maintenance work on 

the motor. 

This machine has been designed to operate 

over a long period of time with a minimum of 

maintenance. Continuous satisfactory operation 

depends upon proper machine care and regular 

cleaning.

Malfunction

Should the machine fail to function correctly, a 

number of possible causes and the appropriate 

solutions are given below:

1.  the motor gets hot

•  The cool ventilation slots in the motor are 

stopped up with dirt.

•  Clean the cool ventilation slots.

•  The motor is defect.

•  Please contact the service address on the 

warranty card.

2.  the connected machine does not work

•  Interruption in the mains connection.

•  Check mains connection for fracture.

•  Please contact the service address on the 

warranty card.

3.  the dust is not absorbed

•  This can be caused by a stopped up dust 

extraction

•  Clean your dust collection opening

 Repairs and servicing should only be 

carried out by a qualified technician or 

service firm.

cleaning

Regularly clean the device’s casing with a soft 

cloth, preferably after each use. Keep the fan slits 

free of dust and dirt. Remove stubborn dirt using 

a soft cloth, dampened with soapy water. Do not 

use solvents such as benzene, alcohol, ammonia, 

etc, which might damage the plastic parts.

lubrication

The device does not need any additional 

lubrication.

defects

If a defect appears due to a part wearing out, 

please contact the service center on the warranty 

card. At the end of these instructions there is 

an exhaustive overview of the parts that can be 

ordered. 

environment

To prevent damage during transport, the 

appliance is delivered in a solid packaging which 

consists largely of reusable material. Therefore 

please make use of options for recycling the 

packaging.

 Damaged and/or disposed of electrical 

or electronic devices must be dropped 

off at recycling stations intended for that 

purpose.

Warranty

Read the warranty conditions on the separately 

supplied warranty card.

The product and the user manual are subject to 

change. Specifications can be changed without 

further notice.