| 18 |
| 19 |
EN
EN
Installation
Connection of
R
ialto
W
hite
B
ox
1. Check that the home router is connected to the Internet.
2. Connect the
W
hite
B
ox
to the home router with the ethernet cable (fig. 1 A).
3. Power up the
W
hite
B
ox
using the USB cable and the relative adapter
provided (fig. 1 B)
4. Check that the two white Leds remain permanently alight within a few
minutes (see page 16 ref 5 and 6).
5. Download the
“R
ialto
” a
pp
from AppStore or Google Play
6. Follow the guided configuration procedure prompted by the app
B
A
fig. 1
Pairing a Rialto device
To add a
R
ialto
device to the existing home network, refer to the relative
installation manuals.
Troubleshooting
Leds
and
blink continuously
/
Check that the ethernet cable is connected properly to the modem/
router
/
Check that the modem/router is correctly powered up
/
Check that DHCP mode is activated at the modem/router
Led
is permanently alight, whereas Led
is neither alight nor blinking
/
Check that the connection between the modem/router and the
internet is working as it should
/
Check for the existence of firewalls or protection systems that could
limit or prevent normal connection of the
R
ialto
W
hite
B
ox
to the
internet
For further information, visit the FAQ area of the website www.rialtocomfort.com
