RIAREX RBR-SB-KTZ001 User Manual Download

Page: 3 / 8

Carton Inventory:

1 x

RBR-SB-KTZ

Reader

1 x

Infr

ared Remote Control

1 x Diode

IN4004 (

for relay circuit protection)

2 x Self tapping Screws

：

Φ3*25mm

2 x Wall Anchors

1 x Screw Driver

INSTALLATION

Remove the back cover from the unit

Drill 2 holes (A, C) on the wall for the screws and one hole for the cable.

Fix the back coverfirmly on the wall with 2 flat head screws.

Attach the unit to the back cover.

Knock the supplied rubber bungs to the screv holes (A, C) .

Thread the cable through the cable hole ( B ).

Summary of Contents for RBR-SB-KTZ001

Page 1: ...RBR SB KTZ001 LAR 2 User Manual ...

Page 3: ...2 x Wall Anchors 1 x Screw Driver INSTALLATION Remove the back cover from the unit Drill 2 holes A C on the wall for the screws and one hole for the cable Fix the back coverfirmly on the wall with 2 flat head screws Attach the unit to the back cover Knock the supplied rubber bungs to the screv holes A C Thread the cable through the cable hole B ...

Page 4: ...rown COM Common for relay output Green NC Normaly Closed relay Yellow OPEN Request to exit Input REX Connection Diagram Common power suplly Attention Install a 1N4004 or equivalent diode is needed when use a common power suplly or the reader might be damaged 1N4004 is included in the packing Access Control Power Suplly ...

Page 8: ...d user 2 Read Card can delete Cards continuously Exit from the programming mode How do release the door Card User Read card KTZ001 Simplified Instruction Function description Choose from the relevant functions below and input Enter the programming mode 123456 then you can do the programming 123456 is the default factory master code ...