PROGRAM
MING
Programming will vary depending on access configuration. Follow the instructions according to your
access configuration
.
General Programming Information
Remote Control
:
Please use the Infrared Remote Control to program the Reader. The infrared
receiver head is near LED, so when program the reader, direct the Remote Control to the LED.
User ID number
: Assign a user ID to the access card in order to track it. The user ID number can
be any number from 1~2000. IMPORTANT: User IDs do not have to be proceeded with any leading
zeros. Recording of User ID is crical. Modifications to the user require the User ID be available.
Proximity Card
: Any 125KHz industry standard 26 bit EM and HID Proximity card or Tag.
Enter and Exit Program mode
Set Master Code
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
﹡
﹡
﹡
(Master Code) #
2. Update Master Code
0
（
New Master Code
）
#
（
Repeat New
Master Code
）
#
3. Exit Program Mode
*
Add User Cards
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
﹡
﹡
﹡
(Master Code) #
2. Add Card: Using Auto ID
(Allows KTZ001 to assign Card to next
available User ID number)
OR
2. Add Card: Select Specific ID
(Allows manager to define a specific User
ID to associate the card to)
OR
2. Add Card: by Card Number
1 (Read Card) #
Repeat Step 2 for additional user cards
1 (User ID) # (Read Card) #
The user ID is any number from 1-2000.
1 (Input 8/10 digits Card number) #
Programming Step
Keystroke Combination
Enter Program Mode
﹡
﹡
﹡
﹡
(Master Code) #
Factory default is 123456
Exit Program Mode
*
