Pag. 20 di 28
SPARK AERIAL
To obtain the best performances of the above mentioned devices, you have to install an aerial
tuned on the installed radio receiver frequency.
N.B. Keep much attention that the central wire of the cable does not enter in touch with the
external copper braiding, which would nullify the functioning of the aerial.
The aerial must be installed perpendicularly and must be in the sight of the remote control.
ANTENNA SPARK 433
code ACG5252
LAMPEGGIATORE SPARK 230V
with incorporated intermittent card code ACG7059
(on request 120V 40W code ACG7060)
FIT SYNCRO
FIT SYNCRO PHOTOCELLS
for the wall-installation - code ACG8026
The range you can set Is 30÷60ft.
You can fit many couples close together thanks to the synchronising circuit.
Add the
SYNCRO TRANSMITTER
, code: ACG8028, for more than 2 photocells couples (up to 4)
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
code ACG8051
E
N
G
L
I
S
H
EXTENSION
code ACG8202
COMET 60S can open a door height up to 3,4mt adding the optional extension accessory.
EXTERNAL UNLOCK DEVICE
code ACZ9011
PUSH BUTTON FLAT
code ACG2013
