BC-55 User Manual V1.7
33
2.1.16 Counting History Information
1) Press the “
” key once to enter the MENU main interface, as shown in Figure 37 below. Press
the “
” key twice again to enter the Debug Menu interface, as shown in Figure 70 below:
Figure 37 Figure 70
2) Touch the “
” button at the lower right corner of the interface in Figure 70 to move to the second
page, as shown in Figure 71 below. Tap
“Log Data”
to enter the coin history information interface, as
shown in Figure 72:
Figure 71 Figure 72
“Total Count”
：
Historical total count
“Counting since last maintenance”
：
Total count since last maintenance, tap to clear
“Maintenance Remind”
：
This is a reminder function when the number of total counts reaches 80W.
After reaching 80W, the customer needs to reset the number of credits on the machine. Customers can
choose to turn on or off by tapping the switch “
” at the back according to their needs.
