BC-55 User Manual V1.7
38
2.3 Introduction of uploading the counting data
If the customer wants to upload the machine’s point currency detail data to the PC, the customer
needs to do the following:
2.3.1 Serial cable connection
Take a USB to 232 serial cable, connect the USB end to the PC, and insert the 232 serial end into
the machine, as shown in Figure 81
Figure 81
2.3.2 Machine Setup
1) Press the “
” key to enter the main interface of USER MENU, as shown in Figure 37 below
，
Press
“Basic”
to enter into Basic Settings
，
as figure 53.
Figure 37 Figure 53
2) Touch the
“Serial Port”
key to enter the baud rate setting interface, as shown in Figure 82 below. Tap
the second item
“Device Choice”
to enter the peripheral selection interface, as shown in Figure 83
below.
USB to 232 data cable, One end of 232
is connected to the 232 female head
end of the machine, and the USB end
is plugged into the computer.
