7
show as in Fig
.
1
1. Turn on the power supply, the machine enters into self-testing mode, the display shows: BC2000 -US.
In the meantime the main motor rotates for 1 second in low speed.
2. If self-testing is correct, the main motor stops, the display shows as following:
Fig
.
1
adjust the Note Guides
After function setting is completed, it is
important to adjust the distance between the
two Note Guides according to the length of the
notes to be counted.
Working Mode Selection
Users can select the mode as in needed with the procedures as
follow.
Press the VALUE key to change between Value mode as is in Fig
.
2,and Normal
mode as is in Fig
.
1
Fig
.
2
Select the denomination banknotes
In Value counting mode, you can press $ key to select the face value of notes
.
→
$
100→
$
50→
$
20→
$
10→
$
5→
$
2→
$
1
