BCS-160 User Manual V1.6
13
Example: put some banknotes (including EUR,USD,GBP,SYP) into the machine for counting. The
display interface after counting is shown in Figure 15
below:
Figure 15
6.3 Quantity Batch and Amount Batch Setting
Under counting interface press
“9 BATCH”
key to enter into Quantity Batch setting interface as
Figure 16
：
Figure 16
Under Quantity batch setting interface, press the numeric key to set the desired batch, press
ENTER key to save setting and exit, the main interface will highlight show the quantity (for example
B:150P means the batch quantity is 150), shown as Figure 70. If it is B:0P, it means the machine will
stop automatically when it counts 200pcs notes.
