BCS-160 User Manual V1.6
18
R-28
IRFeature5
IR feature 5 is detected
R-29
IRFeature6
IR feature 6 is detected
R-30
IRFeature7
IR feature 7 is detected
R-31
IRFeature8
IR feature 8 is detected
R-32
IMG FACE ORT
Image face and orientation is abnormal
R-34
OCR1
Serial number is coved
R-35
OCR2
Serial number is wrong
7.2.2 Check Serial Number
Under the interface of Figure 15 press
“5 REJECT/SN.”
key to enter into following interface as
shown by Figure 24 to check serial number:
Figure 24
Under this interface you can read and check the serial number of accepted notes, press arrow
key to turn pages. To exit the interface please press ESC key or put the notes to count directly.
Notes: this interface can only show when serial number reading function is turned on(SP:800).
7.3 Printing Information
When external printer is connected and is ready for printing, after counting, press LIST key to
enter into list checking interface, then press
“7 PRINT”
key the printer will print the counting list and
total amount automatically. Under the interface of serial number reading, press PRINT key to print the
serial number.
8. User Setting
Press
“8 SET”
key to enter into User Setting interface as Figure 25 shows.
