CS-600A Operation Instructions V1.1
Page 8 of 16
Memory Clearance:
·
First press CLR key to clear the current data;
·
Then press MT to clear data. After data is removed, the indicating lamp
goes out.
Accumulation saving:
·
Press M+ key to accumulate the
current data with the previously
counted data, then save it and the
display is zero.
Similar to data saving procedure:
·
In single channel modes, accumulate only the data of this channel;
·
In total mode, accumulate the data in all the channels.
Batch setting:
·
Press BAT key to enter into batch
setting mode.
