Operation Instructions V1.0
PF-9007 Multi-Currency & Documents Detector
3
The LED indicator on right side from the top down: top white light, side white
light, bottom white light, top IR 940nm(reserved), top IR 850nm, side IR,
bottom IR, UV.
Key Function
DL
key: For changing the white light, Top white light, Side white light and
Bottom white light mode; When you are using white light mode, other light
source is turned off.
Top white light: For detecting the banknotes quality, color and latent image.
Side white light: For detecting the intaglio printing mark and OVI figure;
Bottom white light: For detecting the watermark, metal thread and
“Micro
Perforation
” Mark;
UV
key: For turning the UV (ultraviolet) light on or off; When you are using UV
mode, other light source is turned off.
UV light is for detecting the fluorescent printing and fibers;
IR
key: For changing top infrared light mode,side infrared light mode, bottom
infrared light modeor blink mode;
IR light is for detecting the infrared ink image under 7inch LCD screen.
Blink mode is the mode that two infrared lights turn on alternately for checking
if there are the
„M‟ elements on banknote;
Blink mode is the alternate blinking of top infrared light and bottom infrared
light for checking the blinking features.
MODE
key: If the display is not under parameter adjusting mode, press MODE
key to select the whole image detecting mode, partial image detecting mode
and MAG video agjusting mode.
Keep pressing MODE key, you will enter into parameter adjusting mode.
Under this mode, press MODE, you can adjust Brightness, Contrast of the
LCD display, color and the mirror image menu.(Under parameter adjusting
mode, if you do not press MODE key or “+”,”-” key, the machine will exit from
adjusting mode.
“+”
key : Under normal detecting mode, press this key to select top infrared
light&UV, top infrared light&bottom infrared light, top white light, side white light,
bottom white light, top infrared light, side infrared light, bottom infrared light
and UV detecting mode.
Under parameter adjusting mode, this key can increase the parameter value of
current menu.
“-”
key: Under normal detecting mode, press this key to select various light
mode oppositely as + key.
