Operation Instructions V1.0
PF-9007 Multi-Currency & Documents Detector
4
Under parameter adjusting mode, this key can decrease the parameter value
of current menu.
Installation & Caution
Do not place the Device in places where it can be exposed to direct sunlight or
strong vibrations.
Do not place the Device on uneven surfaces, near moist and dusty places.
To prevent shock hazard, do not disconnect the plug by wet hands.
Taking out the Device from package carton, firstly check whether accessories
are complete, should lack of any accessory, please contact merchant
immediately.
Use power supply (adapter) provided with the device.
Don
‟t pull the power cord when disconnect the power source, in order to
prevent power cord breakage or damage.
Do not gaze at the top UV lamps.
It is strictly forbidden to throw the used lamps in domestic garbage bin. Please
take the scrapped lamps to the appointed recycle bin.
Before you turn on the machine, please check if the machine
‟s voltage is
accordant with your local voltage. Please insert the output end of power
adapter into the DC12V port, insert the input end into the socket.
Interface & Switch
1) There is a power switch on the machine, with indicating light
2) There is a USB port(male connector) in the rear(right hand) of the machine,
which is used to connect with PC to capture image
3) There is a S port in the rear of the machine, which is used to connect with
MC-9002 mouse camera (OPTION)
4) There is a MG port in the rear of the machine, which is used to connect with
MAG video.
5) There is a AV port in the rear of the machine, which is designed for the video
signal transmitting to any outer monitor or TV with a standard video input.
6) There is a USB port(female connector)in the rear(left hand)of the machine,
which is used to connect with laser detecting pen(OPTION)
7) There is a DC12V connector in the rear of the machine, which is used to
