Introduction
©
Rice Lake Weighing Systems
●
All Rights Reserved
5
1.3.2 Annunciator Functions
The 480 display uses a set of eight LED annunciators to provide additional information
about the value being displayed.
See the
480 Legend Series Technical
manual (PN 119201) for more information.
LED
Description
Gross/Brutto LED
Gross weight display mode (or Brutto in OIML mode)
Net LED
Net weight display mode
Zero (Center of Zero) LED
The Center of Zero LED indicates that the current gross weight reading is within
+/- 0.25 display divisions of the acquired zero, or is within the center of zero band.
A display division is the resolution of the displayed weight value, or the smallest
incremental increase or decrease that can be displayed or printed.
Standstill LED
Scale is at standstill or within the specified motion band. Some operations,
including Zero, Tare and Printing, can only be done when the standstill LED is on.
lb/kg LED
Displays which unit of measure is being used.
lb and kg annunciators indicate the units associated with the displayed
value: lb = pounds, kg = kilograms.
The displayed units can also be set to short tons (tn), metric tons (t), ounces (oz),
grams (g), NONE (no units information displayed). The lb and kg LEDs function as
primary and secondary units annunciators. If neither primary nor secondary units
are lb or kg, the lb annunciator is lit for primary units and kg is lit for secondary
units.
T LED
Indicates that a push-button tare weight has been acquired and stored in memory.
PT LED
Indicates that a preset tare weight has been keyed in or entered and stored in
memory.
Table 1-2. LED Annunciators
0
0
Note
Summary of Contents for 480 Legend Series
Page 32: ......