480 Legend Series Digital Weight Indicator
10
Visit our website
1.5.7 Print Ticket
1. Press
to print either the Gross or Net format.
2. Wait for
LED to light.
3. Press
to send data to the serial port.
If
LED is not lit and the
key is pressed, the print action will take place only
if the scale comes out of motion within 3 seconds. If the scale stays in motion for over 3
seconds, the PRINT key press is ignored.
1.5.8 Toggle Gross/Net Mode
1. Press
to switch the display mode between gross and net. If a tare value
has been entered or acquired, the net value is the gross weight minus the tare.
Gross mode —
Gross/Brutto
LED is lit.
Net mode —
Net
LED is lit.
1.5.9 View Audit Trail
1. Press
.
2. Press to AUDIT.
3. Press . The audit trail CALIB is displayed.
4. Press then or to CNT, TIME or DATE.
5. Press to view selected parameter.
6. Press twice to return to CALIB.
7. Press to the audit trail CONFIG and repeat steps 5 and 6 to view configuration
number.
8. Press repeatedly to return to weighing mode.
GROSS
NET
B/N
MENU
Summary of Contents for 480 Legend Series
Page 32: ......