Operation
© Rice Lake Weighing Systems
●
All Rights Reserved
5
3.0
Operation
This sections provides an overview of DHH-10/DHH-10BT operation.
3.1 DHH-10 Scale Operation
The following steps are for DHH-10 operation.
1. To ensure accuracy, place the scale on a hard surface. Make sure there are no objects
beneath the scale before weighing.
2. Tap the top of the scale and wait for 0.0 to display.
3. Gently step onto the scale.
4. Stand evenly on the scale without moving and wait until the weight shown on the display
is stable and locked. The display will flash three times when it is locked.
5. Step off of the scale. Scale will automatically shut off after about 12 seconds.
Overload Indication
Scale overload (maximum weight capacity is indicated on the back of the scale).
Figure 3-1. Overload Indication
Step off the scale to avoid damage.
Re-Weigh Indication
Weight reading error. Wait for the scale to turn off and repeat the weighing process.
Figure 3-2. Re-Weigh Indication
IMPORTANT
