Registration Mode
© Rice Lake Weighing Systems
●
All Rights Reserved
19
4.5 Accumulation and Subtraction
There are two ways to issue a label or receipt for individual products:
1. Place the product on the scale.
2. Enter the known quantity of the product.
4.5.1 Accumulation and Subtraction
1. Confirm scale is at zero. See
2. Enter item number and press
to call up item.
3. Enter the known quantity for the product for accumulation. (Max. 9999999)
4. Press
to exit Total mode.
5. Place product on the scale.
6. Press
to accumulate total.
7. Press
to exit Total mode.
8. Enter the known quantity for the product for subtraction.
9. Press
to issue label or receipt.
10. Remove product from scale and press
.
Auto exit from Total mode can be selected using SPEC 14.
Note
