RL-DBS Operation Manual - Assembly Instructions
3
2.0
Assembly Instructions
The RL-DBS Digital Baby scale comes fully assembled and includes the scale and a 120V or 230V AC adapter.
To set up the scale:
1. Select a sturdy, flat surface on which to place the scale on.
2. Plug in the 120V or 230V AC adapter. The AC power adapter plugs into the back of the indicator as
shown below in Figure 2-1.
Figure 2-1. AC Power Connection Site
The RL-DBS Digital Baby scale is also capable of running on four (4) AA batteries if no additional power source
is available. If the
Lo
prompt is showing on the display, replace the battery or connect the scale to an AC power
source as soon as possible for accurate weighing.
Figure 2-2. Low Battery Indicator
AC Power Plug in
Location
120V adapter shown
230V adapter shown
