4
RL-DBS Operation Manual
3.0
Scale Setup
Figure 3-1. RL-DBS Display
Use the following table to identify what each part of the display does.
Item
Description
Function
ON/TARE
key
On Function
:
One short push for On
One push for Off (approx. five seconds)
Tare Function
:
One short push to Tare out the scale
This key turns the scale on and off
With weight on the scale, press this key to
tare out the scale and return it to zero.
LB/KG
key
One short push
This key selects either pounds/ounces or
kilograms.
RECALL
key
When the scale is turned on, use one short
push
This allows the user to recall the last
weighment, ie: you can remove the baby,
press the recall key and see the baby’s
weight again.
Negative or Minus indicator
When the scale is on, this display shows a
negative weight reading.
zero
ZERO
indicator
When the scale is on, this display indicates
that the scale is stable and ready for use.
mem
Memory indicator
o
Motion indicator
This is displayed when a weight reading is
complete.
It is not displayed while the weight reading is
being calculated.
6-Digit LCD digital display
The LCD displays the infant weight in
pounds/ounces or kilograms and shown by
the
LB
or
KG
indicator on the right side of
the display.
LB/OZ
indicator
When the scale is on, this display indicates
that the scale is weighing in pounds/ounces
KG
When the scale is on, this display indicates
that the scale is weighing in kilograms
Table 3-1. Front Panel, Showing Annunciators
ON/TARE
LB/KG
RECALL
zero mem
ON/TARE
LB/KG
RECALL
