PAGE 2 OF 3
STOP
DON’T RETURN TO STORE!
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 7
Step 2:
Fasten left leg B (#5) to the underside of the left seat (#1) by using bolts (#9)
and washers (#11). Fasten the brace on left leg A (#3) to left leg B (#5) by using
bolts (#9) and washers (#11). Tighten all of the bolts. See Figure 2.
Step 4:
Fasten right leg B (#6) to the underside of the right seat (#2) by using bolts
(#9) and washers (#11). Fasten the brace on right leg A (#4) to right leg B (#6)
by using bolts (#9) and washers (#11). Tighten all of the bolts. See Figure 4.
Step 6
:
Fasten the legs (#7) to the seats (#1 and #2) by using bolts (#10) and washers
(#11). Make sure that all of the bolts have been tightened completely and
cover them with bolt caps (#12).
Step 7
:
Close the seats (#1 and #2) as shown in Figure 7.
Step 5:
Fasten the legs (#7) to the back assembly (#8) by using bolts (#9) and washers
(#11). Keep the bolts loose. See Figure 5.
16
#9 BOLT M6*16
16
#9 BOLT M6*16
16
#9 BOLT M6*16
16
#9 BOLT M6*16
3
5
1
9
9
12
12
11
11
9
9
11
11
12
12
2
4
9
11
12
12
9
11
9
11
12
9
11
12
9
9
12
12
11
11
8
7
7
9
9
11
11
12
12
Step 3:
Place the right seat (#2) onto a non-abrasive surface, such as a carpet, with its
underside facing upwards. Fasten right leg A (#4) to the underside of the right
seat (#2) by using bolts (#9) and washers (#11). Keep the bolts loose.
See Figure 3.
R
R
R
L
6
4
2
7
7
2
1
10
12
11
Note:
The arrow marks on the legs (#7) should coincide with Figure 5 to ensure proper
assembly.
28
#10 BOLT M6*28
12
12
12
