Beijing RichAuto S&T Co., Ltd.
Add.
：
Room 308 Third Street Block A Jiahua Building Haidian District,Beijing, China P.C.
：
100085.
Tell
：
+86-10-62970368/82923063. Fax
：
+86-10-82920078 URL
：
www.richnc.com.cn
Thank you for choosing the products!
This manual helps you be familiar with the company's products, and get information
about systems’ components
、
configuration,etc.
This manual detailed knowledge of the system characteristics
、
operational processes
、
installation and commissioning, and safety precautions.please read this manual
carefully before using the system and machine, which will help you make use it better.
Cautions
：
1. Use of this product is strictly prohibited in the strong interference
、
strong
magnetic field environment. Operating ambient temperature 0-70
℃
, working
environment humidity 0-90% (non-condensing).
2. Insert U disk in the correct direction. Do not pull out 19 pins tenon type socket
cable when system run.
3. Perform processing U disk file process, do not pull out the U disk to prevent the
interruption of data transmission.
4. Strictly prohibited metal, dust, and other conductive substances enter the
controller.
5. The machine shell should connect the ground wire to ensure the safety of the
work and to prevent interference.
6. Prohibited unauthorized disassembly, no internal user repairable parts.
7. For long periods of time, please pay attention to the power outage, and retain.
8. Pay attention to water, dust, fire when using it.
9. Do not use the corrosive chemical solvents to clean the equipment.
10. Spindle motor bearing life and its speed is inversely proportional.
11. Graver is very sharp. Do not touch when it is running, in order to avoid injury; Do
not use handkerchiefs, scarves contact it to prevent embroiled damage.
Important Notice
：
The Company shall not be responsible for any loss caused by improper using or
breaking the correct operating procedures.
