Beijing RichAuto S&T Co., Ltd.
32
1)
Win7 (32 bit) system: after copying files, press“
”, then the lower right corner of the
screen will pop-up a dialog box“
”, select Eject the corresponding U disk.
When you see this dialog box “
”means the U disk has been
removed safely from the computer.
2)
Win XP system: after copying files, press “
”, and click “
”,
then click “
” to remove U disk successfully.
4.2.5 Version View
Users can view information about the system hardware and software, including:
Update Version e.g.:P1.409/rz-xxxx/q13-802
Product ID e.g.:A0020112
Soft Version e.g.:A1.1936
Emergency Version e.g.:A1.1920
Soft type: 3-axis carving
Hardware type: Support 3-inch screen Flash Disk Mode
5. Machine Operation
5.1 Return HOME (ZERO)
It will display “
all axis home
”, “
Z home only
”, “
none axis home
” after starting up the DSP
handle. Choose any one you want. Machine return home can correct the coordinate of system. In
some cases, such as after normal power off, reboot and continue last operation, no need to go
machine ZERO, just choose “
none axis home
” to skip HOME operation. That is because system
automatically saves coordinate value when the system exits normally.
5.2 Import processing file
Before processing, generally we should import files. RichAuto system has 2 ways to import
files: U disk file processing and inner file processing.
1) Directly import the processing file into U disk, and then run with the U disk inserting in the
controller.
2) Copy the files to handle internal storage area via U disk, and then run the inner file without U
disk.
5.3 Manual Processing Operation
Manual Processing Operation refers to move the machine tool by pressing the keypad. User can
