Manual
63300841
3
0
Installation information
Preparation of the door
Installation
1
.
Insert the lock (
1
) into the two punched holes 19.1 mm / 16 mm and 7 mm
2. Fasten the lock (
1
) using the nut (
2
)
3. Screw on the lock (
1
) using the screw (
8
) and the bush (6 or 7) depending on the thickness of the
door
4. Fasten the grommet (
3
) for setting the rotational direction and the locking lever (
4
) using the
screw (
5
)
5. Test the lock function by means of the TestCode when the door is open
6. Test the function when the door is closed
Replacement of the rotary knob
(as needed)
1. Remove the screw (
5
).
2. Using a TG 10 screwdriver (item no. 358008910) to loosen the fastening screw for the rotary
knob by inserting through the threaded hole for the screw (
5
).
3. Fasten the new rotary knob in reversed order.
6
www.richelieu.com
