Manual
63300841
3
0
Operation
Operation is supported by the red/green LED display and an acoustic acknowledgement by means
of signal transmitters.
The key can be used to abort an input procedure.
The procedure is aborted automatically if there is a stop of more than three seconds between
operating the individual keys.
You have four attempts to enter the correct code. After the fourth incorrect entry the entry process is
disabled for one minute as protection against manipulation. The lock is blocked after 100 incorrect
entries. Blocking can only be released with MasterCode2.
Function control
All locks in the SAFE-O-TRONIC
®
63300841
3
0
series are delivered with the same factory
setting. The TestCode for locking and opening is activated in the factory setting.
TestCode
The TestCode can be used to carry out a simple SAFE-O- TRONIC
®
63300841
3
0
functionality check.
Locking and opening using the TestCode
►
Press the 0 key
►
Afterwards press the OK key
►
Turn the knob
Notice:
The
TestCode is retained until initial operation.
0
√
X
9
www.richelieu.com
