Lock the Seat Belt.
Shoulder Seat Belt
Hook the lap seat belt to the Hook
Hook B
Hook A
Seat Belt Lock
Lap Seat Belt
Place this product where the latch
faces forward in the direction of your
vehicle. Then, attach the lap seat
belt around and lock the seat belt.
Top door can be locked/unlocked as figure below.
Lock
Unlock
Important!
The top door can be opened as 120 degree angle. But, it is
designed to stand by itself to prevent a damage to the door
axis. When the top door comes off, stand it in 90 degrees
angle. Then, push in the door axis while supporting the top
cover from the inside.
l
Wring a towel soaked in mild detergent and water, and gently wipe the product. Do not use a scrub brush and/or
a polishing powder as these may cause scratches and/or discoloration to the product.
l
When using creosol or other disinfectants, make sure to dilute them, it may cause discoloration to the product.
l
Do not use harsh chemicals such as thinner, benzene, or alcohol as these may cause discoloration to the
product.
l
After cleaning, place the product in an airy and shady location to avoid discoloration, deformation, deterioration.
First, hook the lap seat belt to the
Hook A. Then, push overhang part
into the Hook B.
Make sure the seat belt locks
correctly, hold this product and pull
the shoulder Seat Belt as the figure
above.
Dimension
Inside dimension
Material
Main Unit ( Base Bed, Top Cover ), Handle : Polypropylene
Door : Polystyrene / Latch, Lock : ABS resin / Non-slip Feet : Polyurethane
l
Make sure to attach the top door to the top cover.
It may case a damage to the product.
Receiver of Door Axis
Door Axis
Lap Seat Belt
Hook A
Pull the Shoulder Seal Belt
Lap Seat
Belt
Hook B
Shoulder Seat Belt
3
2
1
UPC
12.0"W x 19.5"D x 11.5"H
10.0"W x 17.0"D x 11.0"H
803840 800416 / 803840 800423
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
Visit us at
www.richellusa.com
MADE IN JAPAN
l
Please note that product specifications and design may change without prior notice for the purpose of quality improvement.
l
If you have any comments regarding the product, please contact us using the contact information below.
2
