Richenpower Y25 AG Drone
User Manual
©
2022 Richenpower Copy Right
25
standard line spacing distance is 10 meters. NOTE: for a route operation, the line spacing
distance and speed can ONLY be set before route upload. The spray flow rate can be set
anytime.
:
Height
– when the altitude stabilization function of the radar module is enabled, this
icon shows the preset height between the aircraft and the object underneath the aircraft.
Tap the icon or push the throttle stick (left stick in Mode 2) to adjust the height.
:Speed – this icon shows the preset flight speed during Route and A/B route.
Tap to adjust the speed.
NOTE: for a route operation, the speed can ONLY be set
before route upload.
7. Settings
: Tap this icon for more settings of operation and remote controller.
:
Agricultural setting
– tap to adjust A/B route, Position retention parameter
,
Flow meter
and Pump parameters.
:
Safety setting
– tap to adjust battery, drug, flight limitation and Remote controller
parameters.
: Calibrition
– tap to calibrate IMU and Spray flow meter.
:
Remote Controller calibration
– tap to calibrate and set remote controller mode and
buttons.
: RTK BASE/MAP devices setting.
:
Job accounting
:
System setting
– tap to set communication, FPV, and advanced settings. Versions are
shown there.
Tap the
Speed, Height, and Operation
icon to adjust speed, height, spray flow rate per
MU, line spacing distance and line changing method. The
spray flow rate is adjustable
only when
flow speed is enabled
in agricultural setting. NOTE: for a route operation, the
line spacing distance and speed can ONLY be set before route upload. The spray flow rate