GTR057 Installation Manual:
Rev 2
3
5. Installation
1. Remove the back cover from the keypad using the
supplied security screwdriver.
2. Drill four holes on the wall for the screws and 1
hole for the cable.
3. Fix the back cover firmly on the wall with 4 flat
head screws.
4. Thread the cable through the cable hole.
5. Attach the keypad to the back cover.
7. Quick Reference Programming Guide
6. Wiring
To enter programming mode
✱
Master code #
888888 is the default factory master code
To exit programming mode
✱
To change the master code
0 New Code # New code #
The master code is any 6 digits
Note: to undertake the following programming the master user must be logged in
To add a PIN user
The PIN is any 4-6 digits between 0000-999999
except for 1234 which is reserved.
For Zone 1: 1 User ID Number # PIN #
For Zone 2: 1 User ID Number # PIN #
The ID number is any number between 1-1100 for Zone 1 and any
number between 1101-1200 for Zone 2. Users can be added
continuously without exiting programming mode.
To add a card
For Zone 1: 1 Read Card #
For Zone 2: 5 Read Card #
Cards can be added continuously without exiting programming
mode.
To delete a PIN or a card user
2 User ID number #
for a PIN user
2 Read Card #
for a card user
To unlock the door for Zone 1 or Zone 2
To unlock the door for a PIN user
Enter the PIN then press #
To unlock the door for a card or fob user
Present the card
Function
Description
Grey & Black
GND
Negative Pole
Grey
Alarm -
Alarm Negative
Yellow & Black
OPEN2
Request to Exit
Button of Zone 2
Yellow
OPEN1
Request to Exit
Button of Zone 1
Brown
D_IN
Door Status
Detecting
Red
AC & DC
12-24V DC/12-18V
AC Power Input
Black
AC & DC
12-24V DC/12-18V
AC Power Input
Blue & Black
NO2
White & Black
COM2
Green & Black
NC2
Blue
NO1
White
COM1
Green
NC1
