GTR099 swing gate opener manual – Revision 22
13
6.
Sign the bolt-hole point on the gate bracket and gate. Do this by placing a punch or a sign in the middle of each
bolt slot on the post bracket assemblies and the gate bracket. It allows slight adjustments to the post bracket. Then
remove the post bracket and gate bracket by taking off the C-clamps.
Please Note:
Each swing arm
contains an internal thread
that may separate if ever
extended. If overextended a
“click” may be heard. To
reconnect lock the arm and
screw the sliding arm clockwise
until the arm begins to retract
by hand.
