C
M
otor
F
ixing
Assemble the rear bracket and fix it on the pillar.
D
W
ire
C
onnection
:
PART A: Gate Motor and Associated Parts User Manual
3
Remove the wire cover and fix the rear bracket with the pin. Release the gate opener and place the
pin into the fitting position no.1 and no. 2
(1) Avoid tension in the cable during open and close phase.
(2) Always connect the grounding wire(GND)
Blue
Black
Green
A
B
Limit Switch
no.2
A
B
no.1
Motor1-
5V
GND
Limit1
Limit2
Make sure the gate openers are mounted in horizontal position especially in those positions.
1) When gate in CLOSE position
2) When gate in OPEN position
3) When gate at 45
o
angle position
Prior to weld the bracket on the gate leaf(if necessary), cover the gate opener to
prevent damages from sparks.
Summary of Contents for GTR500
