SET UP
PREPERATION FOR STARTING
1.
Check all nuts and bolts. Make sure parts are tightened before
starting.
2.
Before running the compressor remove the white plug and
connect the red bung in it’s place.
3.
Screw the air filter in before starting the compressor.
4.
Place the compressor in a clean, dry and ventilated area.
5.
Keep voltage within ±4% of the rated value.
6.
Keep the oil level in the red circle of the oil glass sight window.
You can purchase compressor oil from our website.
7.
Open the outlet valve, set the power switch knob to the ON
position and let the compressor run for 10 minutes with no load
to ensure the moving parts are lubricated before regular service.
Red bung
Glass sight window
Power Switch Knob
Air filter
5
4
