When the running compressor
needs to be stopped set the
pressure switch to the OFF
position.
Glass sight window
Regulating valve
Bleed nipple
Always vent the compressor
after each use by turning
the regulator knob fully
anticlockwise.
Once the compressor is vented, remove any condensation from
inside the tank by inscrewing the bleed nipple.
THERMAL RESET SWITCH
There may be instances when your compressor will overheat. If it cuts
out, this is the safety feature to protect you and your compressor. Leave
the compressor a good while before you reset it. If the compressor
turns off again on reset you should not keep running it as it may be
damaged and the system may be unsafe.
OPERATION AND ADJUSTMENT
9
8
