58
4.1 Error indication
The plotter can indicate the error on the LCD screen automatically if problem occurred, so it will help
the operator to find solutions. Error indication and malfunction reason as follows:
1
、
Paper out
Reason: When feeding paper or plotting, the „feed paper start‟ sensor works.
Solution: Reinstall the paper and press „7‟; the paper must be put in the correct position where the
balance bar must be under the „feed paper start‟.
2
、
Graph out of range
Reason: The width of the plotting marker is more than the printing range.
Solution: Check the file whether it is correct, makes sure the width of the marker is no more than the
printing range; the origin position is too big, and modify the origin position.
3
、
Origin sensor error
Reason: The origin sensor works abnormal when checking it. The origin sensor works abnormal when
checking it. If the sensor still works when the print head moves to the left side that means the origin
sensor is damaged. If the print head mo
ves the max plotting width, but also can‟t sense the origin
sensor that means the sensor is damaged.
Solution: Check the origin sensor whether it is damaged; check the print head whether it works fine.
Note: if the problem is still there when restarting the machine several times, please contact
RICHFOREVER.
4.2 Note
1.
Please put the balance bar under the „feed paper start‟ sensor when turning on the plotter and reinstalling
the paper.
2.
Don‟t set origin when plotting.
3.
It can‟t set the parameter setting when the data is not finished.
4.
Don‟t send data to the plotter before initialing.
5.
Don‟t feed paper or roll paper when plotting.
6.
Please prevent the balance bar jumps out when you don‟t reinstall paper and press „7‟to exit the paper out
indication.
7.
Don‟t shake the plotter when turn on the plotter.
8.
Please keep the sensors position clear, don‟t block the sensors when plotting.
9. Please take out the ink box when the plotter will not be used in a long time to prevent the print head dirty
and jammed.
10. Don‟t use wet
，
curly and edge turn up paper, and also the paper that has flaw.
11. The plotter uses HP51645A ink box, you can buy it in the hp franchise. Please use quality goods for good
printing quality.
12. Never put hand and other goods beside the print head, or it may hurt person or influence the plotting
quality.
