ASSEMBLY INSTRUCTIONS · ASSEMBLY INSTRUCTIONS · ASSEMBLY INSTRUCTIONS
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
Page 4
(6.14720 En-EN)
8. Hook on the swallow´s nest and
pay
attention to the following notes when
doing this:
9. Attach the safety chain to the chain path
fork.
Note:
The safety chain must not be taut
when the equipment is being used.
10. Check the height (top edge = 50 cm) of
the swallow´s nest when at rest.
11. Repair minor damage caused during
assembly or transportation.
12. Please ensure that all assembly aids,
e.g. excess bolts, assembly instructions,
distance battens or tape are removed
entirely from the play equipment and the
playground after work is finished.
Please note that after about 6 weeks all
screws and bolts need to be checked
and, if necessary, retightened.
a When installing joints make sure that the bolt head fits snugly into the milled slot.
b The nut has to be tightened to the end of its thread.
c Make sure that the joints move smoothly.
d Tighten the bolts until the uppermost chain link cannot be moved.
8
10
9
a
b
b
c
d
d
a
8
9
