Step 4. Assemble the bench seating
1. • Assemble the seats to the bench feet pieces making sure the 2 screw holes on the
bench feet are at the front and that the seat is correctly positioned as shown in the
diagram below.
2. • Place all the assembled bench seats in the correct position inside the hot tub making
sure that the 2 screws on the bench feet are facing towards the centre of the hot tub.
3. • When all the bench seats are in the correct position, screw them down.
Hint:
When bolting the seats to the bench feet, use an Allen/hex key to turn the M6 x 75
bolt piece on the top while using a socket piece to hold the nut in place underneath.
If you do not have a socket set, simply insert a screwdriver up underneath to hold the
nut in place as you turn the bolt piece.
PARTS:
Hint:
To adjust the seat height so that the most enjoyable water level for young and old is
achieved, simply place blocks of wood under the bench feet and screw down. Try
using the hot tub first to determine the best height then empty and re-screw the
into the desired height for optimum enjoyment.
seats
10
Pencil
Bench
1
2
3
4
1 Bench top
2 M6x75
3 Bench feet
4 M5x60
-
； -
； -
； -
NO.
Component
Screw size
PIC
1
Bench top M6x75
2
Bench feet M65x60
TOOLS:
