Step one- Assemble the base
1. Place the two base halves upside down and interlock together.
Hint: If having trouble interlocking the 2 base halves together, make sure that one end is
interlocked together and bolt this end together through the bottom fastening piece
as shown. Once the bolt has been tightened, ‘wiggle’ the 2 base halves gently up and
down slightly and the 2 base halves should gradually join together.
2. Place the base connector pieces of wood in line with the holes on the base struts.
3. Insert the M8x100LM into the base connector pieces of wood and tighten.
4. Insert the M8x100LM into the bottom fastening pieces and tighten.
5. Connect the supplied flexible drain hose to the drain, making sure the rubber seal is
correctly fitted.
6. Carefully flip the base over and lay onto your desired position.
7. We recommend your wooden hot tub to sit either on a wooden deck designed to carry
the heavy weight or to sit on a solid concrete pad, paving slabs or crushed rocks with a
sand base.
TOOLS:
M8x100LM
Connector
Base Fastening Piece
PARTS:
5
NO.
Component
Screw size
PIC
1
Base Connector
M 8x100
