20 June 2005
PHOTOCONDUCTOR UNIT (PCU)
3-35
Replacement
Adjustment
3.11.5 DRUM CLEANING BLADE 2
1. Remove the OPC drum. (
3.11.2)
2. Remove the charge roller and cleaning roller. (
3.11.4)
3. Remove the movable cleaning blade [A]. (
x 1)
Re-installation
•
Engage the left end of the cleaning blade first, then make sure that both arms [B]
and [C] are through the holes on the left and right side.
•
When you re-attach the snap-ring, make sure that the head of the snap ring [D] is
below the blade.
CAUTION:
After re-assembly make sure that the front spring of the movable
cleaning blade is re-attached to the
,
position. ( 3.11.2)
B195R939.WMF
[A]
[B]
[C]
[D]
