SERVICE PROGRAM MODE TABLES
20 June 2005
5-64
SMTP
5852*
Simple Mail Transfer Protocol. The protocol for communication between Internet
main MTAs (Message Transfer Agents).
5852 1* SMTP Server Name
Allows you to specify the server by either its IP address or
host name. If you use the host name, then you must also
specify the DNS.
5852 2* SMTP Server Port
Number
Sets the port number of the SMTP server.
[0~65535 /
25
/ 1]
5852 3* SMTP Type
5852 4* SMTP User Name
Enter a text string for the user name.
5852 5* SMTP Password
Enter a character string for the password.
5852 7* POP Before SMTP
During mail sending, determines whether the POP server
connection is validated before connecting to the SMTP
server. This prevents unauthorized access to the SMTP
server and requires users to access and log onto the
POP3 server before sending e-mail.
0
: No. POP server connection validated.
1: Yes. POP server connection validated before SMTP
connection.
5852 8* POP Server Name
Sets the name of the POP server. You can use either the
IP address or the host name. If you use the host name,
then you must also specify the DNS.
5852 9* POP Server Port
Number
Sets the port number of the POP server.
[1~65535 /
110
/ 1]
5852 10* POP User Name
Sets the POP user name used to validate POP connection
before SMTP connection. This validation is switched on
with SP5852 6 (POP Before SMTP). Limit: 63 characters.
5852 11* POP Password
Sets the POP password used to validate POP connection
before SMTP connection. This validation is switched on
with SP5852 6 (POP Before SMTP). Limit: 63 characters.
5852 12* POP Auth.
Encryption
Determines whether encryption is done when POP
connection is validated before SMTP connection.
[0~2 /
0
/ 1]
0: Automatic
1: No. Without encryption.
2: Yes. With encryption.
Stamp Data Download
5853*
Use this SP to download the fixed stamp data stored in the firmware of the ROM
and copy it to the HDD. This SP can be executed as many times as required. This
SP must be executed after replacing or formatting the hard disks.
Note
: This SP can be executed only with the hard disks installed.
5856
Remote ROM Update
When set to “1” allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
cycled off and on.
[0~1 /
0
/ 1]
0: Not allowed
1: Allowed
