SERVICE PROGRAM MODE TABLES
20 June 2005
5-66
Debug Save When
5858*
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857 002.
SP58583 stores one SC specified by number.
Refer to Section 4 for a list of SC
error codes.
58581* Engine SC Error (0:OFF 1:ON)
Stores SC codes generated by copier engine
errors.
58582* Controller SC Error (0:OFF 1:ON
Stores SC codes generated by GW controller
errors.
58583* Any SC Error (0:OFF 1:ON
[0~65535 /
0
/ 1]
58584* Jam (0:OFF 1:ON
Stores jam errors.
5859*
Debug Log Save Function
5859 1* Key 1
5859 2* Key 2
5859 3* Key 3
5859 4* Key 4
5859 5* Key 5
5859 6* Key 6
5859 7* Key 7
5859 8* Key 8
5859 9* Key 9
5859 10* Key 10
These SPs allow you to set up to 10 keys for log files for
functions that use common memory on the controller
board. (
5.3.1)
[-9999999~9999999 / 0 / 1]
5860
SMTP/POP3/IMAP4
SMTP Server Name
5860 1
Allows you to specify the name of the SMTP server. Enter either the host name or the
IP address. If you enter the host name, you must also specify the name of the DNS
server.
SMTP Server Port Number
5860 2
This SP sets the number of the SMTP server port.
[1~65535/1]
SMTP Certification
5860 3
This setting switches SMTP certification on and off for mail sending.
0
: Off
1: On
SMTP Certification User Name
5860 4
Allows you to set the user name to be used for SMTP certification. This user name is
used only when the user name for SMTP certification has not been selected with the
software application. The user name includes the "realmID" string.
SMTP Certification Password
5860 5
Allows you to set the password to be used for SMTP certification. The length of the
password is limited to 128alphanumeric characters.
