Making Printer Settings Using the Control Panel
162
❒
Default: Auto
❖
SSID
You can set an SSID in the infrastructure mode and the 802.11 Ad hoc
mode.
Select
[
View
]
to check the SSID. Select
[
Enter ID
]
to set SSID.
• View
• Enter ID
❒
Select
[
?
]
to enter
[
/
]
for the SSID. Also,
[
¥
]
appears when printing the
configuration page, read it as
[
/
]
.
❒
Default: blank (ASSID)
❒
Characters used are ASCII 0x20-0x7e (32 bytes).
❒
An SSID is set automatically to the nearest access point if no SSID has
been set.
❒
If no SSID has been set for the 802.11 ad hoc mode, an SSID is set au-
tomatically and the same SSID is used for the 802.11 ad hoc mode and
the infrastructure mode.
❒
If blank is specified in SSID for 802.11b adhoc mode or adhoc mode,
“ASSID” appears.
❒
An SSID can also be set using Web Image Monitor. For details, see
Web Image Monitor Help.
❖
WEP Setting
You can specify whether or not to activate WEP settings.
• Active
• Not Active
❒
Default: Not Active
❒
The WEP key can be entered using a hexadecimal number or an ASCII
character sequence.
❒
When using 64 bit WEP, up to 10 hexadecimal or 5 ASCII characters
can be entered. When using 128 bit WEP, up to 26 hexadecimal or 13
ASCII characters can be entered.
❒
The WEP key can also be set using Web Image Monitor. For details, see
Web Image Monitor Help.
❖
USB Setting
You can select the transmission speed for USB.
